The DME manages up to 4 tools simultaneously and is fully compatible with 10 different
JBC tools.

Check below the complete list of compatible tools.
The MVE Pneumatic Desoldering Module is indispensable for a complete desoldering
process. Clean and dry compressed air is required.
It provides the best soldering quality thanks to JBC Most Efficient Soldering System and additionally Sleep & Hibernation modes help to extend life of tips.
It features all the Excellence range benefits such as station customization, full control of soldering processes and remote work management.
Although the Control Unit is compatible with 10 different JBC tools,
the DMPSE works simultaneously with the T210 Precision Purpose Handle, the AM120 Micro Tweezers and the DR560 Desoldering Iron.

AC適配器:18.9 x 14.6 x 15.0 in / 31.33 lb

環(huán)境工作溫度:10 to 40 C / 50 to 104 F

局域網(wǎng)（以太網(wǎng)）:Remote control / Traceability

峰值功率:160 W per tool ? 23.5 V

焊嘴與接地間電阻:<2 ohms

焊嘴與接地間電壓:<2 mV RMS

真空（6巴）:90% / 680 mmHg / 26.8 inHg

Selectable Temperature:90 to 450 C / 190 to 840 F

Max. and min. temperature:Limit the temperature range in which the operator is allowed to work.

Voltage (AC):ref. DMPVE-1QA - 120 V

Package:480 x 370 x 380 mm / 14.21 kg

Temperatue levels:Instant selection of up to 3 editable temperature settings for solder joints with different heat requirement.

PIN protection:Keep station parameters protected against unauthorized access.

Sleep and Hibernation mode:These modes lower soldering tip temperature when the tool rests in the stand in order to avoid oxidation and extending tip life.

USB-B (rear):Software PC / Traceability

USB-A (front):Firmware update.

Robot:RS-232 remote control or Smart Fume Extractor connection

Dynamic Soldering Profiles:Designed to avoid thermal shock when soldering Ceramic Chip components like MLCC, this new and unique feature allows controlling the heating ramp up rate of the tool to gradually increase the temperature of the

Soldering graphics:Real time visualization of tip temperature and power delivered to the solder joint during soldering process.

10 user interface languages:English, German, Spanish, French, Italian, Portuguese, Russian, Japanese, Korean, Chinese.

PS:Interconnection of up to 5 PSE control units to manage up to 24 tools simultaneously.

Air pressure supply:up to 6 bar

Flow rate (at 6 bar):15 SLPM

Dimensions/Net weight:See individual modules